Paul, a Singaporean merchant in laboratory equipment sent an e-mail last night, expressing that he would like to purchase a water chiller to cool laboratory equipment.
Specific requirements were as follows: 1. the water pressure had better be 5bar (no less than 3bar), with lift up to 3-18L/min; 2. the cooling capacity shall reach 3000W at a water temperature of 10℃.
According to Paul’s requirements, S&A recommended two suitable types of water chillers: one is CW-6200 water chiller with 5100W cooling capacity, but the cooling capacity of which can only reach 3000W at a water temperature of 20℃; the other one is CW-6300 water chiller with 8500W cooling capacity, the cooling capacity of which can reach 5000W at a water temperature of 10℃. (Note: The maximum lift of S&A water chillers can reach 70L/min)
After comparing relevant data of the two types of water chillers, Paul was more inclined to purchase CW-6300 water chiller with higher cooling capacity.
Thank you so much for your support and trust in S&A. All S&A water chillers have passed the certification of ISO, CE, RoHS and REACH, and the warranty period has been extended to 2 years. Our products are worthy of your trust!
S&A has a perfect laboratory test system to simulate the use environment of water chillers, conduct high-temperature test and improve quality continuously, aiming to make you use at ease; and S&A has a complete material purchasing ecological system and adopts the mode of mass production, with annual output of 60000 units as a guarantee for your confidence in us.
The technical parameter of CW-6200: http://www.teyuchiller.com/Products/ChillerCW62005100Wco.html
Specific requirements were as follows: 1. the water pressure had better be 5bar (no less than 3bar), with lift up to 3-18L/min; 2. the cooling capacity shall reach 3000W at a water temperature of 10℃.
According to Paul’s requirements, S&A recommended two suitable types of water chillers: one is CW-6200 water chiller with 5100W cooling capacity, but the cooling capacity of which can only reach 3000W at a water temperature of 20℃; the other one is CW-6300 water chiller with 8500W cooling capacity, the cooling capacity of which can reach 5000W at a water temperature of 10℃. (Note: The maximum lift of S&A water chillers can reach 70L/min)
After comparing relevant data of the two types of water chillers, Paul was more inclined to purchase CW-6300 water chiller with higher cooling capacity.
Thank you so much for your support and trust in S&A. All S&A water chillers have passed the certification of ISO, CE, RoHS and REACH, and the warranty period has been extended to 2 years. Our products are worthy of your trust!
S&A has a perfect laboratory test system to simulate the use environment of water chillers, conduct high-temperature test and improve quality continuously, aiming to make you use at ease; and S&A has a complete material purchasing ecological system and adopts the mode of mass production, with annual output of 60000 units as a guarantee for your confidence in us.
The technical parameter of CW-6200: http://www.teyuchiller.com/Products/ChillerCW62005100Wco.html
The technical parameter of CW-6300: http://www.teyuchiller.com/Products/ChillerCW63008500Wco.html
CONTACT
S&A
TE:+86-20-89301885
FAX:+86-20-84309967
SKYPE:
teyuchiller
Email:marketing@teyu.com.cn
没有评论:
发表评论