The cooling of thermal-film packaging machine with S&A CW-6000 water chiller

The customer's company was mainly engaged in the sales of thermal-film packaging machine, which hoped to cool a thermal-film component of the thermal-film packaging machine through water cooling.
Through detailed communication, S&A Water Chiller analyzed its concept and combined the application condition of water chiller, and then found that the cooling of a component on the thermal-film packaging machine with the water chiller matched with the thermal-film packaging machine may cause wear to water pump of the water chiller due to over-high temperature of the pipe that water flows through.
But despite of the tip ofS&A Water Chiller, the customer in thermal-film packaging machine still considered that feasible and required detailed quotation for CW-6000 water chiller. Thank you so much for your support and trust inS&A!
S&A has a perfect laboratory test system to simulate the use environment of water chillers, conduct high-temperature test and improve quality continuously, aiming to make you use at ease; and S&A has a complete material purchasing ecological system and adopts the mode of mass production, with annual output of 60000 units as a guarantee for your confidence in us.
the CW-6000 tecnical parameter: http://www.teyuchiller.com/Products/ChillerCW60003000Wco.html

CONTACT S&A

TE:+86-20-89301885

FAX:+86-20-84309967

SKYPE: teyuchiller

Email:marketing@teyu.com.cn

Website: http://www.teyuchiller.com

The cooling of shaft producing equipment with S&A CW-3000 water chiller by a German customer

Recently, upon receiving an e-mail from a German customer about placing order for the second time, S&A was very surprised. We all know that, Germans are very rigorous, but why did the customer directly place order without prior communication. After a careful look, it was found that the customer had purchased S&A CW-3000 water chiller previously.
The German customer was a shaft manufacturer, who had purchased water chillers of other brands on Alibaba. But after a period of use, he found that these water chillers had poor quality and couldn’t achieve the cooling effect, but the problem was still not solved after contacting the after-sales service. With an annual demand of 150 water chillers, the customer had to find a water chiller manufacturer with quality assured. So, through comparison in production scale, quality assurance and after-sales service, the customer chose S&A. there is a saying: Once bitten,twice shy.In view ofprevious shopping experience without guarantee, the German customer became cautious this time and only purchased one CW-3000 water chiller for trial, and then would consider subsequent purchase.
In the e-mail, the German customer said that S&A water chiller gave him a surprise with excellent cooling effect and quality. So, he decisively placed order for a second time (this time, he wanted to customize S&A CW-3000 water chiller equipped with copper & aluminum-fincondenser and 45℃mechanical thermostat)! Thank you so much for your trust in S&A!
S&A Water Chiller has 11 patent certificates; has passed the certification of ISO9001, CE, RoHS and REACH, with the warranty period of 2 years; complies with the conditions for air transportation, green, energy-saving and environment-friendly; and may customize the model according to different needs of customers. S&A Water Chiller is definitely the first choice of customers at home and abroad.
S&A has a perfect laboratory test system to simulate the use environment of water chillers, conduct high-temperature test and improve quality continuously, aiming to make you use at ease; and S&A has a complete material purchasing ecological system and adopts the mode of mass production, with annual output of 60000 units as a guarantee for your confidence in us.
The technical parameter of CW-3000 cooler: http://www.teyuchiller.com/Products/ChillerCW300050Wradi.html

CONTACT S&A

TE:+86-20-89301885

FAX:+86-20-84309967

SKYPE: teyuchiller

Email:marketing@teyu.com.cn

Website: http://www.teyuchiller.com

The cooling of CNC multi-head drilling spindle with S&A CW-6000AN water chiller

Some customers in CNC machine will match water chillers for customers when selling equipment. Then which brand of water chiller should they choose?
Recently, S&A Water Chiller received Mr. M from Guangzhou. Mr. M was engaged in the maintenance service of CNC machine and sales of imported bearings. A multi-head spindle used by a customer of Mr. M often failed, and the cooling effect of the equipment for cooling the spindle was not ideal. Mr. M was frustrated and didn’t know how to allocate the cooling equipment. He found S&A Water Chiller through the Internet.
At the beginning, Mr. M worried that our water chiller couldn’t match his spindle. Through detailed inquiry, we recommended S&A water-cooled CW-6000AN water chiller and introduced it with pictures and text. This dispelled Mr. M’s doubts. Through our recommendation, Mr. M delightfully purchased S&A CW-6000AN water chiller. Mr. M highly commended us: I just need and you are just professional.It’s really a pleasure to cooperate with you!
Thank Mr. M sincerely for his praise: I just need and you are just professional. This is the best affirmation to the professionalism of S&A! Since its establishment in 2002, S&A has been dedicated to professional design, research and production of water chillers. S&A water chillers have various models, and the coverage of which is becoming wider and wider. Being precise & efficient, intelligent & convenient, safe in use, stable in performance, energy-saving and environment-friendly, S&A water chiller is honored as the “expert in industrial cooling” in the industry.
Thank you so much for your support and trust in S&A!
S&A has a perfect laboratory test system to simulate the use environment of water chillers, conduct high-temperature test and improve quality continuously, aiming to make you use at ease; and S&A has a complete material purchasing ecological system and adopts the mode of mass production, with annual output of 60000 units as a guarantee for your confidence in us.
The technical parameter of CW-6000: http://www.teyuchiller.com/Products/ChillerCW60003000Wco.html

CONTACT S&A

TE:+86-20-89301885

FAX:+86-20-84309967

SKYPE: teyuchiller

Email:marketing@teyu.com.cn

Website: http://www.teyuchiller.com

The cooling of Mikrouna glove box with S&A CW-5000 water chiller

There isan ancient Chinese proverb: Good wine needs no bush.But in the times of rapid development of Internet, good wine also needs bush.
So, since its establishment in 2002, S&A has been striving to become an expert of the industry. S&A has been dedicated to professional design, research and production of water chillers. S&A water chillers have various models, and the coverage of which is becoming wider and wider. Being precise & efficient, intelligent & convenient, safe in use, stable in performance, energy-saving and environment-friendly, S&A water chiller is honored as the “expert in industrial cooling” in the industry.
Just becomes of the unremitting efforts of all employees of S&A, we have more and more domestic and foreign customers. What thrills us is that some customers specify to purchase S&A water chillers.
Mr. Li who was engaged in the production ofhandheldcoding machine also specified to purchase S&A CW-5000 water chiller with 800W cooling capacity. Mr. Li purchased S&A CW-5000 water chiller to cool the imported Mikrouna glove box. He didn’t know our brand previously, but the Mikrouna glove box manufacturer suggested him to purchase S&A CW-5000 water chiller to achieve better cooling effect.
S&A has a perfect laboratory test system to simulate the use environment of water chillers, conduct high-temperature test and improve quality continuously, aiming to make you use at ease; and S&A has a complete material purchasing ecological system and adopts the mode of mass production, with annual output of 60000 units as a guarantee for your confidence in us.
The technical parameter of CW-5000: http://www.teyuchiller.com/Products/ChillerCW5000800Wcoo.html

CONTACT S&A

TE:+86-20-89301885

FAX:+86-20-84309967

SKYPE: teyuchiller

Email:marketing@teyu.com.cn

Website: http://www.teyuchiller.com

S&A CW-6000 dual-temperature water chiller for minimally invasive surgery like medical thulium laser

Recently, a worker of S&A visited a laser manufacturer in Shanghai to learn the service condition of S&A CW-6000 dual-temperature water chiller and CW-5200 dual-temperature water chiller. It mainly produced medical holmium laser and thulium laser used for minimally invasive surgery of urology department. Especially in summer, the mode of temperature control is switched to the mode of intelligent temperature control, and then the water chiller can adjust the temperature of cooling water automatically according to the change of ambient temperature, without artificial monitoring, which is very convenient.
S&A Water Chiller has been keeping pace with the times. Through fifteen years of development, S&A water chillers have had various models and widely applied in the cooling of professional fields, such as laser processing equipment, UV equipment, analytical instrument, CNC machine, thermoforming equipment, semiconductor and medical equipment.
S&A has a perfect laboratory test system to simulate the use environment of water chillers, conduct high-temperature test and improve quality continuously, aiming to make you use at ease; and S&A has a complete material purchasing ecological system and adopts the mode of mass production, with annual output of 60000 units as a guarantee for your confidence in us.
The technical parameter of CW-6000 dual-temperature: http://www.teyuchiller.com/Products/Singlepumpanddualtem.html

CONTACT S&A

TE:+86-20-89301885

FAX:+86-20-84309967

SKYPE: teyuchiller

Email:marketing@teyu.com.cn

Website: http://www.teyuchiller.com