2016年1月27日星期三
2016年1月26日星期二
Coherent laser customer is impressed from S&A chiller factory
“I was very impressed from S&A chiller
factory, especially the production area with the very modern material
flow system and the 100% endtest of every chiller. Also the employee
philosophy is very good! Otherwise, the overseas sales manager is so
kind & friendly& competent” the Coherent laser customer after
visiting S&A chiller new factory comments.
S&A chiller is applied to cool Coherent laser:http://www.teyuchiller.com/Article/SAchillerCW5200for20_1.html
S&A chiller is applied to cool Coherent laser:http://www.teyuchiller.com/Article/SAchillerCW5200for20_1.html
FAX:+86-20-84309967
SKYPE:
teyuchiller
Email:marketing@teyu.com.cn
2016年1月25日星期一
S&A industrial chillers have multiple alarm funtions
S&A industrial chillers have multiple alarm
funtions, when alarm occurs, the erro code and the temperature will be
altrnately displayed.
When the temperature controller displasy code E1, it means over high room temperature, please improve the ventilation to guarantee that the machine is running under 40℃
When it displasys E2 that means over high water temperature, the simple troubleshooting as below:
1． Blocked dust gauze, bad thermolysis; approach: unpick and wash the dust gauze regularly ;
2． Poor ventilation for air outlet and inlet, approach: to ensure a smooth ventilation for air outlet and inlet;
3． Voltage is extremely low or astable, approach: to improve the power supply circuit or use a voltage regulator;
4． Improper parameter settings on thermostat, approach: to reset controlling parameters or restore factory settings;
5． Switch the power frequently, approach: to ensure there is sufficient time for refrigeration (more than 5 minuets ) ;
6． Excessive heat load, approach: reduce the heat load or use other model with larger cooling capacity.
S&A chiller details:http://www.teyuchiller.com/product/
When the temperature controller displasy code E1, it means over high room temperature, please improve the ventilation to guarantee that the machine is running under 40℃
When it displasys E2 that means over high water temperature, the simple troubleshooting as below:
1． Blocked dust gauze, bad thermolysis; approach: unpick and wash the dust gauze regularly ;
2． Poor ventilation for air outlet and inlet, approach: to ensure a smooth ventilation for air outlet and inlet;
3． Voltage is extremely low or astable, approach: to improve the power supply circuit or use a voltage regulator;
4． Improper parameter settings on thermostat, approach: to reset controlling parameters or restore factory settings;
5． Switch the power frequently, approach: to ensure there is sufficient time for refrigeration (more than 5 minuets ) ;
6． Excessive heat load, approach: reduce the heat load or use other model with larger cooling capacity.
S&A chiller details:http://www.teyuchiller.com/product/
FAX:+86-20-84309967
SKYPE:
teyuchiller
Email:marketing@teyu.com.cn
订阅：
博文 (Atom)