During operation, water chiller will take some
heat away through exhaust outlet. But when indoor space is small, room
temperature will rise. Is there any solution to this problem?
Mr. Luo from a university of Singapore that S&A met last week encountered this problem. S&A recommended that Mr. Luo may install a ventilating duct extending to the outside (the diameter of the duct shall be larger than that of exhaust outlet of the water chiller) at the exhaust outlet of the water chiller. This can effectively solve the problem of room temperature rise caused by water chiller.
Mr. Luo would like to use an S&A Water Chiller to cool the 5KW fiber laser independently researched & developed by Mr. Luo. On the official website of S&A, Mr. Luo viewed the types of water chiller and thought CW-7800 water chiller suitable. S&A CW-7800ET dual-temperature dual-pump water chiller with 19KW cooling capacity has two independent temperature control systems, including high-temperature end and low-temperature end. The low-temperature end mainly cools fiber body, and high-temperature end cools QBH connector or lens.
Thank you so much for your support and trust in S&A. All S&A water chillers have passed the certification of ISO, CE, RoHS and REACH, and the warranty period has been extended to 2 years. Our products are worthy of your trust!
S&A has a perfect laboratory test system to simulate the use environment of water chillers, conduct high-temperature test and improve quality continuously, aiming to make you use at ease; and S&A has a complete material purchasing ecological system and adopts the mode of mass production, with annual output of 60000 units as a guarantee for your confidence in us.
The technical parameter of CW-7800ET: http://www.teyuchiller.com/Products/DualpumpchillerCW78000.html
Mr. Luo from a university of Singapore that S&A met last week encountered this problem. S&A recommended that Mr. Luo may install a ventilating duct extending to the outside (the diameter of the duct shall be larger than that of exhaust outlet of the water chiller) at the exhaust outlet of the water chiller. This can effectively solve the problem of room temperature rise caused by water chiller.
Mr. Luo would like to use an S&A Water Chiller to cool the 5KW fiber laser independently researched & developed by Mr. Luo. On the official website of S&A, Mr. Luo viewed the types of water chiller and thought CW-7800 water chiller suitable. S&A CW-7800ET dual-temperature dual-pump water chiller with 19KW cooling capacity has two independent temperature control systems, including high-temperature end and low-temperature end. The low-temperature end mainly cools fiber body, and high-temperature end cools QBH connector or lens.
Thank you so much for your support and trust in S&A. All S&A water chillers have passed the certification of ISO, CE, RoHS and REACH, and the warranty period has been extended to 2 years. Our products are worthy of your trust!
S&A has a perfect laboratory test system to simulate the use environment of water chillers, conduct high-temperature test and improve quality continuously, aiming to make you use at ease; and S&A has a complete material purchasing ecological system and adopts the mode of mass production, with annual output of 60000 units as a guarantee for your confidence in us.
The technical parameter of CW-7800ET: http://www.teyuchiller.com/Products/DualpumpchillerCW78000.html
CONTACT
S&A
TE:+86-20-89301885
FAX:+86-20-84309967
SKYPE:
teyuchiller
Email:marketing@teyu.com.cn
没有评论:
发表评论