Reasons and solutions for poor refrigeration performance in industrial water chiller

Industrial water chiller consists of condenser, compressor, evaporator, sheet metal, temperature controller, water tank and other components. It is widely used in plastic, electronics, chemistry, medicine, printing, food processing and many other industries that are closely related to our daily life. Daily maintenance is quite necessary for the normal operation of the industrial refrigeration system. And poor refrigeration performance is the common problem for the industrial users. So what are the reasons and solutions for this kind of problem?

Reason 1: Temperature controller of the industrial water cooler is faulty and unable to control temperature
Solution: Change for a new temperature controller.

Reason 2: The cooling capacity of the industrial refrigeration system is not big enough.
Solution: Change for a chiller model that has proper cooling capacity.

Reason 3: The compressor has a malfunction - not working/rotor being stuck/rotating speed slowing down)
Solution: Change for a new compressor or related parts.

Reason 4: The water temperature probe is faulty, not able to detect water temperature at real-time and the water temperature value is abnormal
Solution: Change for a new water temperature probe

Reason 5: If the poor performance occurs after the industrial water chiller is used for a certain period of time, that might be:
A.The heat exchanger is full of dirt
Solution: Clean the heat exchanger properly

B.The industrial water cooler leaks refrigerant
Solution: Find and weld the leakage point and refill with proper amount of refrigerant of the correct type
C.The operating environment of the industrial water cooler is too hot or too cold

Solution: Position the chiller in a well-ventilated room where ambient temperature is below 40 degree C.

Guangzhou Teyu Electromechanical Co., Ltd.

SKYPE: teyuchiller

Email: marketing@teyu.com.cn

Website: https://www.teyuchiller.com

Tel: + 86-20-89301885

Fax: + 86-20-84309967

About S&A Brand

S&A(TEYU) was founded in 2002. After 19 years of development, the headquarter covers an area of 18,000 square meters, and has about 300 employees.  

Why choose S&A

Product Advantages:

1. With 11 patent certificates，CE, RoHS and REACH approval; Conforms to air transport requirements; 2 years warranty;

2.±0.1℃ high precision temperature control, stable cooling performance,support 

ModBus-485 communication;

3. Establish logistic warehouses at USA and Europe;

Manufacturing Advantages:

1.Independent R&D on sheet metal, evaporator, condenser and cores parts of chiller;

2. Annual output 8 0,000 units, product exports rate above 60%；

3. Standard bulk production, standard parts rate up to 80% ；

4. With excellent laboratory testing system, simulates actual working environment for 

chiller.