S&A industrial water chiller CW-5200 for cooling magnetizer

A customer purchased S&A industrial water chiller CW-5000 to cool magnetizer not long ago.
However he found the chiller CW-5000 displayed high temperature alarm during running. We gave fast response for the first time when receiving the problem. After checking, we found out the frequency of magnetizer was turned up, leading to heat load getting larger. As a result, we suggested the customer to replace by the chiller CW-5200 with 1.4KW cooling capacity.

CONTACT S&A

TE:+86-20-89301885

FAX:+86-20-84309967

SKYPE: teyuchiller

Email:marketing@teyuchiller.com

Website: http://www.teyuchiller.com

S&A air cooled water chiller for cooling MF welding machine

A customer is interested in S&A air cooled water chiller to chilled MF welding machine, however, he doesn’t know how to choose a suitable chiller.
As the heat load of welding machine is small, we recommend air cooled water chiller CW-5200 at last, which is of 1.4KW cooling capacity, ±0.3℃temperature stability, and the water temperature can be adjusted.
CW-5200 technical parameter: http://www.teyuchiller.com/Products/ChillerCW52001400Wco.html

CONTACT S&A

TE:+86-20-89301885

FAX:+86-20-84309967

SKYPE: teyuchiller

Email:marketing@teyuchiller.com

Website: http://www.teyuchiller.com

S&A air cooled water chiller CW-5200 for lab equipment

A customer from an institute of optic and precision mechanics is in need of purchasing S&A air cooled water chiller to chilled lab equipment.
This is the cooling requirements:The chiller’cooling capacity is up to 570W at 20℃water temperature and 35℃ environment temperature, and the flow rate over 10L/min.
As a result, we recommend S&A industrial water chillerCW-5200 according to refrigeration performance curve.It has 1400W cooling capacity and 16L/min flow rate.
CW-5200 technical parameter:http://www.teyuchiller.com/Products/ChillerCW52001400Wco.html

CONTACT S&A

TE:+86-20-89301885

FAX:+86-20-84309967

SKYPE: teyuchiller

Email:marketing@teyuchiller.com

Website: http://www.teyuchiller.com

air cooled chiller is better than cooling pump for the engraver

S&A find that more and more people use air cooled chiller instead of cooling pump to cool engraving machine.
What is the difference between air cooled chiller and cooling pump? Follow me.
1.    Simple maintenance: We should pay attention to the water temperature change when using cooling pump, however, the air cooled chiller is of water flow and high temperature alarm function, so it is simple to maintain the machine.
2.    Cooling performance stability: S&A air cooled chiller has temperature control function, you can adjust the water temperature; the cooling pump has not above mentioned function.
3.    Long working life: The air cooled chiller is closed loop cooling system, but the cooling pump is not a closed loop chiller, the impurity falls into cooling water easily and lead to pump broken. 

CONTACT S&A

TE:+86-20-89301885

FAX:+86-20-84309967

SKYPE: teyuchiller

Email:marketing@teyuchiller.com

Website: http://www.teyuchiller.com

customer reflected air cooled chiller CW-6000 running very well

This morning, I received the feedback regarding S&A air cooled chiller running status from a customer.
The customer reflected the air cooled chiller CW-6000 running very well.
Chiller CW-6000 is applied to cool HF welding machine, which has 3KW cooling capacity, ±0.5℃ temperature stability and multiple alarm function such as compressor time-delay protection, compressor overcurrent protection, water flow alarm and over high / low temperature alarm.
CW-6000 technical parameter:http://www.teyuchiller.com/Products/ChillerCW60003000Wco.html

CONTACT S&A

TE:+86-20-89301885

FAX:+86-20-84309967

SKYPE: teyuchiller

Email:marketing@teyuchiller.com

Website: http://www.teyuchiller.com