How to change “intelligent mode” to “constant temp mode” for S&A chiller

Generally speaking, S&A chiller temperature controller is intelligent mode as factory setting. It does not need to adjust water temperature under intelligent mode. It will self-adjust controlling parameters according to room temperature for meeting equipment cooling requirement.
However, if you need to adjust the water temperature, you should change it to constant temp mode.
Firstly, please change intelligent temperature to constant temperature mode
1. Press and keep holding ▲and SET buttons, then wait for 5 seconds until "0" displayed
2. Press ▲ key  to switch to "8" and release the key
3. Press "SET" key, and it displays "F0"
4. Press ▲ to turn to item "F3"
5. Press "SET" key and it displays "1"
6. Press▼ to adjust to "0"
7. Press "RST" key to save the modification
Now  the chiller is working in constant temperature mode.

Under constant temperature mode, you can manually adjust the temperature of S&A water chiller
For exmaple, to set the water temperature at 35℃
1. Press and keep holding ▲and SET buttons

2. Then for 5 seconds and it displays "0"

3. Press ▲ key  to switch to "8" and release the key

4. Press "SET" key, and it displays "F0"

5. Press  "SET" key again

6. Press▼ to adjust to "35"

7. Press "RST" key to save the modification

CONTACT S&A

TE:+86-20-89301885

FAX:+86-20-84309967

SKYPE: teyuchiller

Email:marketing@teyuchiller.com

Website: http://www.teyuchiller.com