Is the laser cutter power the higher the better?

Laser cutter has become quite common these days. It offers unmatched cutting quality and cutting speed, which outperforms many traditional cutting methods. But for many people who are the laser cutter users, they often have a misunderstanding - the higher the laser cutter power the better? But is it really the case?

Well, absolutely not. In terms of laser power, laser cutter can be divided into low power laser cutter, middle power laser cutter and high power laser cutter. For relatively thin stainless steel sheet and carbon steel sheet, low power laser cutter should be sufficient to perform high quality cutting while maintaining high cutting speed. Choosing the right one can help you not only improve the working efficiency but also save considerable operating cost. So what should be considered when selecting a proper laser cutter? 

1.The type and thickness of the materials to be processed

Generally speaking, the thicker the materials, the bigger the cutting difficulty. That means thicker materials require laser cutters of higher power. And there are two common types of laser cutters. One is CO2 laser cutter and the other is fiber laser cutter. For cutting non-metal materials, CO2 laser cutter is often the ideal option. And for metal materials, fiber laser cutter works better. 

2.Your budget

Many people would consider the ratio of investment and output. It is normal that the higher the power of the laser cutter, the more expensive it will be. And different configurations inside the laser cutter also lead to price difference.

But no matter what laser cutter you get in the end, there is one thing you can’t ignore - cooling problem. Either CO2 laser or fiber laser can generate heat in the operation. And the higher the power, the more heat the laser cutter would generate. If those heat continues to accumulate, it will certainly lead to serious problem like machine shut down. And a laser chiller is often the “cure” for this issue. 

S&A Chiller offers a wide variety of laser water chillers for fiber laser, CO2 laser and many other laser sources ranging from low power to high power. The cooling capacity can be up to 30KW and the temperature stability can be up to ±0.3°C. With 20 years of experience, S&A Chiller has helped many users in more than 50 countries to solve their overheating problems. Go select the ideal water chiller for your laser cutter at https://www.teyuchiller.com/products 

What kinds of change can laser bring to glass processing?

Laser processing as a new manufacturing technique has immersed in different industries in the recent years. From the original marking, engraving to big metal cutting and welding and to later micro-cutting of high precision materials, its processing ability is quite versatile. As its applications continue to have more and more breakthrough, its ability to process many different kinds of materials has improved a lot. To put it simply, the potential of laser application is quite huge.

Traditional cutting on glass materials

And today, we are going to talk about laser application on glass materials. We believe that everyone comes across various glass products, including glass door, glass window, glassware, etc.. With glassware being so widely used, the processing demand of glass is huge. The common laser processing on glass is cutting and drilling. And since glass is quite brittle, special attention needs to be paid during the processing.

Traditional glass cutting requires manual cutting. The cutting knife often uses diamond as the knife edge. Users use that knife to scribe a line with the assistance of a rule and then use both hands to tear it apart. However, the cut edge would be quite rough and needs to be polished. This manual method is only suitable for cutting glass of 1-6mm thickness. If thicker glass is needed to be cut, kerosene needs to be added on the surface of the glass before cutting.

This seemingly outdated way is in fact the most common way of glass cutting in many places, especially glass processing service provider. However, when it comes to plain glass curve cutting and drilling in the middle, it quite hard to do that with that manual cutting. Plus, the cutting precision can not be guaranteed.

Waterjet cutting also has quite a lot of applications in glass. It uses water coming from high pressure water jet to achieve high precision cutting. Besides, waterjet is automatic and is able to drill a hole in the middle of the glass and achieve curve cutting. However, waterjet still needs simple polishing.

Laser cutting on glass materials

In the recent years, laser processing technique has experienced rapid development. The breakthrough in ultrafast laser technique enables high precision laser technique continues to develop and gradually immerses into glass processing sector. In principle, glass can better absorb infrared laser than metal. Besides, glass can not conduct heat very efficiently, so the laser power needed to cut the glass is much lower than that to cut the metal. The ultrafast laser used in cutting glass has changed from original nanosecond UV laser to picosecond UV laser and even femtosecond UV laser. The price of the ultrafast laser device has dropped dramatically, indicating bigger market potential.

Besides, the application is heading towards high-end trend, such as smart phone camera slide, touch screen, etc.. Leading smart phone manufacturers basically use laser cutting to cut those glass components. With the demand of smart phone increases, the demand of laser cutting would definitely increase.

Previously, laser cutting on glass can only maintain at 3mm thickness. However, the last two years witnessed a huge breakthrough. Right now, some manufacturers can achieve 6mm thickness laser glass cutting and some even reach 10mm! The laser cut glass has the advantages of no pollution, smooth cut edge, high efficiency, high precision, a level of automation and no post-polishing. In the coming future, laser cutting technique might even be used in automobile glass, navigator glass, construction glass, etc..

Laser cutting can not only cut glass but also weld glass. As we all know, combining glass is quite challenging. In the past two years, institutes in Germany and China successfully developed glass laser welding technique, which makes laser have more applications in the glass industry.

Laser chiller that is specifically used for glass cutting

Using ultrafast laser to cut glass materials, especially those used in electronics, requires the laser equipment to be highly precise and reliable. And that means an equally precise and reliable laser water chiller is a MUST.

S&A CWUP series laser water chillers are suitable for cooling ultrafast lasers, such as femtosecond laser, picosecond laser and UV laser. These recirculating water chillers can reach up to ±0.1℃ precision, which is leading in the domestic laser refrigeration industry.

CWUP series recirculating water chillers feature compact design and are able to communicate with computers. Since they were promoted in the market, they have been very popular among the users. Go explore these laser water chillers at https://www.teyuchiller.com/uv-laser-chillers_c4

Guangzhou Teyu Electromechanical Co., Ltd.

SKYPE: teyuchiller

Email: marketing@teyu.com.cn

Website: https://www.teyuchiller.com

Tel: + 86-20-89301885

Fax: + 86-20-84309967

About S&A Brand

S&A(TEYU) was founded in 2002. After 19 years of development, the headquarter covers an area of 18,000 square meters, and has about 300 employees.  

Why choose S&A

Product Advantages:

1. With 11 patent certificates，CE, RoHS and REACH approval; Conforms to air transport requirements; 2 years warranty;

2.±0.1℃ high precision temperature control, stable cooling performance,support 

ModBus-485 communication;

3. Establish logistic warehouses at USA and Europe;

Manufacturing Advantages:

1.Independent R&D on sheet metal, evaporator, condenser and cores parts of chiller;

2. Annual output 8 0,000 units, product exports rate above 60%；

3. Standard bulk production, standard parts rate up to 80% ；

4. With excellent laboratory testing system, simulates actual working environment for 

chiller.

What is flying laser marking machine anyway?

Laser marking machine can be divided into flying laser marking machine and static laser marking machine. These two types of laser marking machines have the same working principle. Their main difference lies in the driven software. Flying laser marking machine perform vector marking, which means the cursor needs to move along a single-direction axis and the marking process is realized during the moving of the marked subject. As for static laser marking machine, the cursor just simply marks on the subject’s static surface.

Flying laser marking machine is a kind of industrial automatic equipment with assembly line. That means, the product line won’t require human to operate the machine and its production capacity is several times that of static laser marking machine. That is because static laser marking machine belongs to semi-automatic marking and requires human to place the work piece continuously after the former one is finished marking. This kind of operating pattern is time consuming. Therefore, static laser marking machine is only suitable for industries that don’t have big production capacity.

Flying marking machine, as its name suggests, doesn’t have a working table. Instead, it can be more flexible and perform marking 360 degree on the product surface. It can also be integrated into the assembly line and perform marking through the moving of the track.

To sump up, flying laser marking machine is a kind of laser marking machine that has fast marking speed and high level of industrial automation integration without human labor. It can do the same kind of marking job of static laser marking machine with higher efficiency. Therefore, flying laser marking machine becomes a more and more popular choice for industrial business owners.

Just like many other laser equipment, flying laser marking machine also comes with a laser water chiller to help dissipate its excessive heat. And most of the machine users would choose S&A recirculating water chillers. S&A recirculating water chillers are suitable for cooling CO2 lasers, UV lasers, fiber lasers, ultrafast lasers, laser diodes and YAG lasers. The cooling capacity ranges from 600W to 30KW while the temperature stability is up to ±0.1℃. Some bigger laser water chiller models even support Modbus-485 communication protocol, which enables intelligent communication with the laser systems. Find out your ideal S&A laser water chiller at https://www.teyuchiller.com/standard-chillers_c3

Guangzhou Teyu Electromechanical Co., Ltd.

SKYPE: teyuchiller

Email: marketing@teyu.com.cn

Website: https://www.teyuchiller.com

Tel: + 86-20-89301885

Fax: + 86-20-84309967

About S&A Brand

S&A(TEYU) was founded in 2002. After 19 years of development, the headquarter covers an area of 18,000 square meters, and has about 300 employees.  

Why choose S&A

Product Advantages:

1. With 11 patent certificates，CE, RoHS and REACH approval; Conforms to air transport requirements; 2 years warranty;

2.±0.1℃ high precision temperature control, stable cooling performance,support 

ModBus-485 communication;

3. Establish logistic warehouses at USA and Europe;

Manufacturing Advantages:

1.Independent R&D on sheet metal, evaporator, condenser and cores parts of chiller;

2. Annual output 8 0,000 units, product exports rate above 60%；

3. Standard bulk production, standard parts rate up to 80% ；

4. With excellent laboratory testing system, simulates actual working environment for 

chiller.

Laser engraving, a technique that brings color to our life

Laser engraving is a novel printing method in the recent years. When it comes to printing, most of us will think about paper printing, on both sides of the paper. However, there is a new technique. And that is laser engraving and it has immersed into our daily life.

Laser engraving machine can work on many different kinds of materials, including paper, hardboard, thin metal, acrylic board, etc.. But where does the pattern come from? Well, it’s easy and they are from the computer. Users can design their own patterns on the computer via certain kinds of software and they can change the specification, pixel and other parameters too.

The design software and the laser engraving machine are connected to each other. That is to say, what is on the computer is what we get in the laser engraving process. What makes people even amazed is that laser engraving machine has a very fast printing speed and users can control the height and width of the pattern. Therefore, laser engraving machine is a new technology that combines modern printing and computer-controlled system.

Nowadays in the market, there are already many laser engraved works, such as laser engraved photo. Most of the laser engraved photos are made from wood and they are mostly used as gifts between friends or families.

Not just wood is the ideal laser engraved material. Stainless steel bottle and glass bottle are also the popular ones. Using laser engraving machine on those materials are much faster than traditional engraving. Just a laser engraving machine and a computer can make the engraving job done.

However, not just anyone can operate the laser engraving machine. People needs to be trained for basic skills and then operate the machine. But those kinds of basic skills are easy to learn, so people who want to open their own laser engraving shops don’t need to worry so much.

There is another big advantage of laser engraving - environmental friendly. Laser engraving machine won’t produce any pollution and requires no consumables. This can greatly reduce the operating cost. Plus, it can work 24/7, reducing lots of human labor cost.

Based on different laser sources, laser engraving machines are generally divided into fiber laser engraving machine and CO2 laser engraving machine. Both of these two types of laser engraving machines require cooling device to help bring down the temperature of their laser respective laser sources. But their cooling methods are different. For fiber laser engraving machine, since the fiber laser used is generally very low-powered, air cooling is sufficient to take away the heat. However, for CO2 laser engraving machine, since the CO2 laser used is much bigger, water cooling is often the consideration. By water cooling, we often refers to laser water chiller. S&A CW series laser water chillers are suitable for cooling CO2 laser engraving machines of different powers and offer different temperature stability, including ±0.3℃, ±0.1℃ and ±1℃. Go find out your ideal laser chiller units at https://www.teyuchiller.com/co2-laser-chillers_c1

Guangzhou Teyu Electromechanical Co., Ltd.

SKYPE: teyuchiller

Email: marketing@teyu.com.cn

Website: https://www.teyuchiller.com

Tel: + 86-20-89301885

Fax: + 86-20-84309967

About S&A Brand

S&A(TEYU) was founded in 2002. After 19 years of development, the headquarter covers an area of 18,000 square meters, and has about 300 employees.  

Why choose S&A

Product Advantages:

1. With 11 patent certificates，CE, RoHS and REACH approval; Conforms to air transport requirements; 2 years warranty;

2.±0.1℃ high precision temperature control, stable cooling performance,support 

ModBus-485 communication;

3. Establish logistic warehouses at USA and Europe;

Manufacturing Advantages:

1.Independent R&D on sheet metal, evaporator, condenser and cores parts of chiller;

2. Annual output 8 0,000 units, product exports rate above 60%；

3. Standard bulk production, standard parts rate up to 80% ；

4. With excellent laboratory testing system, simulates actual working environment for 

chiller.

The complete using guide of anti-freezer in laser water chiller

Time flies! It’s already winter now and many customers recently called us about how to dilute the anti-freezer and what to do when the laser water chiller is not used for a long time in winter. But first, let’s get to know the basic knowledge about anti-freezer.

Purpose of anti-freezer

Anti-freezer, as its name suggests, can prevent the water in the circulation circuit from freezing so that the internal water pipeline will not expand and burst because of frozen water . There are many different kinds and different formulas of anti-freezers in the market, which is quite dazzling. Therefore, many customers don’t know what to choose or how to dilute the anti-freezers. Some customers even choose some anti-freezers that are not suitable for our industrial water chiller.

Performance requirement of anti-freezer in the chiller

Our water chiller has certain performance requirements on the anti-freezer used. Wrong type or inappropriate use of anti-freezer will lead to the damage of the internal water pipeline. The performance requirements for the anti-freezer are as follows:

1.Stable chemical performance;
2.Good anti-freeze performance;
3.Relatively low low-temperature viscosity;
4.Anti-corrosion and rust prevention;
5.No swelling or corrosion on the sealed rubber tube

At home and abroad, water based anti-freezers that contain ethylene glycol or propylene glycol are commonly used. These kinds of anti-freezers can be used after being diluted according to certain proportion.

As for the mother solution of the anti-freezer which is the concentrated type can not be used directly. It needs to be diluted with softened water to certain concentration based on the temperature requirement. Now we are going to introduce two of the commonly used anti-freezers.

Ethylene glycol concentration form

From the above form, we can see that the freezing point of ethylene glycol anti-freezer will change as its concentration changes. When the volume concentration is below 56%, the freezing point will become lower as the concentration increases. However, when the volume concentration is above 56%, the freezing point will become higher as the concentration increases. When the volume concentration reaches 100%, the freezing point reaches to -13 degree C. That is the reason why concentrated type anti-freezer can not be added into the chiller directly.

P.S. For certain kind of laser sources, they may have certain requirements for the anti-freezer. Therefore, it is suggested to consult the laser source manufacturer before adding.

Propylene glycol concentration form

As for the propylene glycol, the volume concentration - freezing point relation is similar to ethylene glycol.

3 principles of using anti-freezer

1.The lower the concentration the better

Most of the anti-freezer is corrosive. Anti-freezer with concentration of more than 30% containing ethylene glycol will lead to decreased performance of certain kinds of laser sources and posts potential risk to stainless steel water pump motor mechanical seal. Therefore, while meeting the anti-freezing performance requirement, the lower the concentration the better.

2.The shorter using time the better

After being used for a certain period of time, anti-freezer is likely to deteriorate. And the deteriorated anti-freezer is more corrosive with higher viscosity. Therefore, it is suggested to change out the anti-freezer periodically and the suggested changing frequency would be once a year. In summer, we use purified water. In winter, we change out the new anti-freezer.

3.Do not mix different types of anti-freezers

It is suggested to use the same type and same brand of the anti-freezer. That is because even different types of anti-freezer have the same ingredients, their additives might be different. Mixing of different types of anti-freezers may cause chemical reaction, leading to bubble or sendimentaion.

The domestic market situation of UV laser

In order to meet the demand from different industries, UV laser is being upgraded to higher and higher power and has more and more applications. Right now the modern industry requires high-end development, which requires the laser processing efficiency to grow. For the time being, 10+W UV laser is quite popular in the market and in the future, high power, short pulse high repetition frequency UV laser is expected to become the mainstream.

There are quite a few UV laser manufacturers in our country, including Huaray, Bellin, Inngu, RFH, Inno, Gain Laser, Grace Laser, Meiman Laser, etc..

In terms of product quality, the UV laser technique in our country is quite mature. For UV lasers below 20W, they are basically domestically made. As the technique continues to have more and more breakthrough, some domestic enterprises successfully develop 30W and even 40W UV laser. Those enterprises include Bellin, Huaray and Inngu. In the coming future, 30+W UV laser will have bigger and bigger potential.

In terms of demand, UV laser is almost used in electronics area. Affected by the 3C market in the past few years, domestic UV laser market demand has fluctuant growth. In 2017, the demand reached the peak and in 2018 the demand dropped a little bit. And in 2019 the demand indicated a growing trend and in 2020 the trend continued.

In terms of major players in the domestic market, they are pretty stable. Inno, RFH, Huaray, Inngu, Gain Laser and Logan Laser dominate the domestic UV laser market. They together accounts for around 80% of the market share. Among those major players, Inno has the highest market share of around 18%.

For UV laser, no matter it is 3W or 30W, it often comes with a laser water chiller to guarantee its processing accuracy. S&A Teyu air cooled industrial chillers could be the ideal choice. They are suitable for cooling 3W to 30W UV lasers and are available in rack mount and standalone units for selection. The temperature stability offers ±0.2℃ or ±0.1℃, which indicates superior ability to control water temperature. Therefore, the laser output of the UV laser can be guaranteed. For detailed air cooled industrial chiller models for UV laser, click https://www.teyuchiller.com/uv-laser-chillers_c4

Guangzhou Teyu Electromechanical Co., Ltd.

SKYPE: teyuchiller

Email: marketing@teyu.com.cn

Website: https://www.teyuchiller.com

Tel: + 86-20-89301885

Fax: + 86-20-84309967

About S&A Brand

S&A(TEYU) was founded in 2002. After 19 years of development, the headquarter covers an area of 18,000 square meters, and has about 300 employees.  

Why choose S&A

Product Advantages:

1. With 11 patent certificates，CE, RoHS and REACH approval; Conforms to air transport requirements; 2 years warranty;

2.±0.1℃ high precision temperature control, stable cooling performance,support 

ModBus-485 communication;

3. Establish logistic warehouses at USA and Europe;

Manufacturing Advantages:

1.Independent R&D on sheet metal, evaporator, condenser and cores parts of chiller;

2. Annual output 8 0,000 units, product exports rate above 60%；

3. Standard bulk production, standard parts rate up to 80% ；

4. With excellent laboratory testing system, simulates actual working environment for 

chiller.

CO2 laser marking machine vs fiber laser marking machine

Laser marking machine can leave permanent marking on the material surface. And comparing with laser engraving machine, it is more commonly used in applications that require higher precision and delicacy. In electronics, electrical appliance, hardware, precision machinery, glass & watch, jewelry, automobile accessories, plastic pads, PVC tubes, etc., you can often see the trace of laser marking. There are a few types of laser marking machines in the market. In addition to UV laser marking machine which has the highest precision, CO2 laser marking machine and fiber laser marking machine are very common in the different industries. So what are the differences between these two?

CO2 laser marking machine vs fiber laser marking machine

1.Performance

CO2 laser marking machine can be installed with CO2 RF laser tube or CO2 DC laser tube and the laser power is big. These two types of CO2 laser sources have different lifespan. For CO2 laser RF tube, its lifespan can reach 60000 hours while for CO2 DC laser tube, its lifespan is about 1000 hours. The lifespan of the laser source is closely related to the one of the CO2 laser marking machine.

As for fiber laser marking machine, it has the highest electro-optical conversion efficiency and has pretty low energy consumption. It features high marking speed which is 2 to 3 times faster than traditional laser marking machine. And the fiber laser source inside has around several hundred thousand hours in its lifespan.

2.Application

CO2 laser marking machine is suitable for non-metal materials, including paper, leather, fabrics, acrylic, wool, plastics, ceramics, crystal, jade, bamboo, etc.. As for the applicable industries, it can be used in consumer electronics, food package, beverage package, medicine package, construction ceramics, gift, rubber products, furniture and so on.

As for fiber laser marking machine, it is suitable for metal materials, such as stainless steel, carbon steel, aluminum, alloy, copper, etc.. As for the applicable industries, it can be used in jewelry, knife, electrical appliance, hardware, automobile accessories, medical machinery, construction pipe, etc..

3.Cooling method

Based on different laser source, CO2 laser marking machine requires water cooling or air cooling, since their laser powers are often quite big.

As for fiber laser marking machine, the commonly used cooling method is air cooling.

For CO2 laser marking machine, water cooling is an important task, since it decides the normal operation of the machine. So is there a reliable supplier whose laser water chiller can provide efficient water cooling? Well, S&A Teyu could be your ideal choice. S&A Teyu has more than 19 years experience in laser cooling and develops a wide variety of laser water chillers applicable to cool CO2 laser, fiber laser, UV laser, ultrafast laser, laser diode, etc.. You can always find the suitable laser water chiller in S&A Teyu. If you are not which one is suitable for you, you can e-mail to marketing@teyu.com.cn and our colleagues will give you the professional chiller model selection advice.

Guangzhou Teyu Electromechanical Co., Ltd.

SKYPE: teyuchiller

Email: marketing@teyu.com.cn

Website: https://www.teyuchiller.com

Tel: + 86-20-89301885

Fax: + 86-20-84309967

About S&A Brand

S&A(TEYU) was founded in 2002. After 19 years of development, the headquarter covers an area of 18,000 square meters, and has about 300 employees.  

Why choose S&A

Product Advantages:

1. With 11 patent certificates，CE, RoHS and REACH approval; Conforms to air transport requirements; 2 years warranty;

2.±0.1℃ high precision temperature control, stable cooling performance,support 

ModBus-485 communication;

3. Establish logistic warehouses at USA and Europe;

Manufacturing Advantages:

1.Independent R&D on sheet metal, evaporator, condenser and cores parts of chiller;

2. Annual output 8 0,000 units, product exports rate above 60%；

3. Standard bulk production, standard parts rate up to 80% ；

4. With excellent laboratory testing system, simulates actual working environment for 

chiller.

Several tips on solving water blockage in laser water chiller

 Laser water chiller often goes with different kinds of laser systems which are commonly used in a wide variety of industries. However, in some industries, the working environment could be quite harsh and inferior. In this case, the laser chiller unit is easy to have the limescale. As it gradually accumulates, water blockage will occur in the water channel. Water blockage will affect the water flow so that the excessive heat from the laser system can not be taken away effectively. Therefore, the production efficiency will be greatly affected. So how to solve the water blockage in the laser water chiller?

First, check the location of the water blockage is in the external water circuit or the internal water circuit.

2.If the water blockage occurs in the internal water circuit, users can use the clean water to wash the pipeline first and then use the air gun to clear the water circuit. Later, add the clean distilled water, purified water or deionised water into the laser chiller unit. In daily use, it is suggested to change out the water on a regular basis and add some anti-scale agent to prevent limescale if necessary.

3.If the water blockage occurs in the external water circuit, users can check that circuit accordingly and remove the blockage easily.

Regular maintenance is quite helpful in keeping normal operation of the laser water chiller. If you have any other questions about laser chiller unit, you can e-mail to techsupport@teyu.com.cn or leave your message here.

S&A Teyu is a professional industrial chiller manufacturer based in China with 19 years of refrigeration experience. Its product range covers CO2 laser chiller, fiber laser chiller, UV laser chiller, ultrafast laser chiller, rack mount chiller, industrial process chiller and so on.

Buy Water Chillers at Factory Price! Get Live Quotes Now! 

https://www.teyuchiller.com/high-precision-uv-laser-water-chillers-cwul-05-with-long-life-cycle_p18.html

Guangzhou Teyu Electromechanical Co., Ltd.

SKYPE: teyuchiller

Email: marketing@teyu.com.cn

Website: https://www.teyuchiller.com

Tel: + 86-20-89301885

Fax: + 86-20-84309967

About S&A Brand

S&A(TEYU) was founded in 2002. After 19 years of development, the headquarter covers an area of 18,000 square meters, and has about 300 employees.  

Why choose S&A

Product Advantages:

1. With 11 patent certificates，CE, RoHS and REACH approval; Conforms to air transport requirements; 2 years warranty;

2.±0.1℃ high precision temperature control, stable cooling performance,support 

ModBus-485 communication;

3. Establish logistic warehouses at USA and Europe;

Manufacturing Advantages:

1.Independent R&D on sheet metal, evaporator, condenser and cores parts of chiller;

2. Annual output 8 0,000 units, product exports rate above 60%；

3. Standard bulk production, standard parts rate up to 80% ；

4. With excellent laboratory testing system, simulates actual working environment for 

chiller.

What kinds of industrial sectors does 3D laser cutting machine excel in?

As the global manufacturing center is gradually shifting to our country, the laser cutting machine market demand is increasing. And laser cutting technique is gradually replacing traditional processing techniques due to its flexibility and high precision. In addition, after years of development, the domestic laser cutting technology has acquired huge success.

Among all the laser cutting technology, 3D laser cutting machine is no doubt one of the most popular techniques. It incorporates the unique features of high flexibility and speed from robots and can perform cutting on work pieces of different sizes. Besides, 3D laser cutting machine is able to perform 3D cutting on work pieces of irregular shapes, meeting different customers needs.

As the manufacturing industry is being more and more emphasized, 3D laser cutting machines as the high-tech manufacturing methods are going to have more and more opportunities. So what kinds of industrial sectors does 3D laser cutting machine excel in?

1.Sheet metal processing
3D laser cutting machine features high precision and high speed and no requirement of developing mould. Due to its high cost-performance ratio and high production efficiency, it is very popular in the sheet metal sector.

2.Automobile
Automobile sector is where high tech accumulates. In European countries, about 50%~70% of the automobile components are processed by laser technique. In automobile sector, the commonly used laser techniques are laser welding and laser cutting, including 2D laser cutting and 3D laser cutting.

3.Oil piping
Cutting oil pipe is one of the typical laser application in petrochemical sector. With 3D laser cutting machine, it can realize cut line of wide outside and narrow inside or vice versa. This kind of gradient-type cut line enables the oil pipe to have better performance.

4. Agricultural machinery
3D laser cutting machine improves the quality of the agricultural machinery. Besides, since 3D laser cutting machine doesn’t require mould opening, agricultural machinery manufacturers can faster respond to the market demand and take up more market share.

3D laser cutting machines in the market are often powered by fiber laser. As the key component of the 3D laser cutting machine, fiber laser is also the “heat generator”. The higher the power, the more heat it will generate. And those heat can not be dissipated by itself alone. Therefore, how to take away the heat from the fiber laser has become a major concern for the 3D laser cutting machine users. At this moment, a refrigerated water chiller would be very ideal. S&A Teyu CWFL series refrigerated water chillers are characterized by dual temperature system. Two independent temperature control circuits are designed for cooling the fiber laser and the laser head respectively. From 500W to 20000W fiber laser cutters, you can always find a suitable laser water chiller in S&A Teyu Chiller. Find out the complete refrigerated water chiller models here: https://www.teyuchiller.com/fiber-laser-chillers_c2

Guangzhou Teyu Electromechanical Co., Ltd.

SKYPE: teyuchiller

Email: marketing@teyu.com.cn

Website: https://www.teyuchiller.com

Tel: + 86-20-89301885

Fax: + 86-20-84309967

About S&A Brand

S&A(TEYU) was founded in 2002. After 19 years of development, the headquarter covers an area of 18,000 square meters, and has about 300 employees.  

Why choose S&A

Product Advantages:

1. With 11 patent certificates，CE, RoHS and REACH approval; Conforms to air transport requirements; 2 years warranty;

2.±0.1℃ high precision temperature control, stable cooling performance,support 

ModBus-485 communication;

3. Establish logistic warehouses at USA and Europe;

Manufacturing Advantages:

1.Independent R&D on sheet metal, evaporator, condenser and cores parts of chiller;

2. Annual output 8 0,000 units, product exports rate above 60%；

3. Standard bulk production, standard parts rate up to 80% ；

4. With excellent laboratory testing system, simulates actual working environment for 

chiller.