Mr. Ou comes from the company specializing in producing photocuring 3D
printer, 3D metal printer, powder sintering 3D printer and coated sand
3D metal printer. Photocuring 3D printer is a unique 3D printing
technology characterized by its high-speed and precision. Parts are
printed by using the UV laser and the liquid UV-curable photopolymer
named “photo-sensitive resin”. The laser beam is controlled to scan on
the liquid surface of the resin, so the liquid surface will be cured to
form a cross-section film of the part scanned. After a layer cured, the
newly formed layer is covered by another layer of liquid resin, followed
by the scanning process to cure the layer on the previously formed
section of the part. In this way, the complete 3D part will finally be
printed out after curing layer by layer. Ou wants to purchase a S&A
chiller to cool the UV laser of the photocuring 3D printer. Alternative
chiller is S&A CW-5000 and CWUL-10 chiller.
On the phone, S&A learned that Ou was using the UV lasers from
Huaray and RFH LASER. Then S&A recommended S&A CWUL-10 chiller
for cooling 3-13W UV laser. S&A CWUL-10 chiller, with the cooling
capacity of 800W and the temperature control accuracy of ±0.3℃; is
designed for UV laser, and characterized by its slight fluctuations of
water temperature, stable water pressure and laser light, longer life
and lower costs. On the recommendation of Xiao Te, Ou placed an order of
S&A CWUL-10 UV laser chiller.
CONTACT S&A
TE:+86-20-89301885
FAX:+86-20-84309967
SKYPE: teyuchiller
Email:marketing@teyu.com.cn
Website: http://www.teyuchiller.com
没有评论:
发表评论